DIY Framed Chicken Wire Bulletin Board

IMAG7530

I love do it yourself projects, especially when they are simple, and there is instant gratification of accomplishment.  This project is just that.

The former owners left a lot of stuff behind, so I happened to have all the materials.  Thank You!  Everything in this project is easy to come by.

IMAG7525<

You will need:

Hammer

Wire Cutters

Frame (Thrift store, garage sale)

Chicken Wire (Farm Supply Store, or Big Box Home Improvement Store)

Galvanized Poultry Staples (Farm Supply or Big Box Home Improvement Store)

Safety Goggles

You can also use a staple gun in place of the hammer and poultry staples.  I didn’t have access to one.  It is still packed up in a box.

First, remove the back of the frame.  You won’t need it.

Second, cut a piece of chicken wire to fit the inside of the frame.  I had a giant roll of chicken wire that was hard to handle, so I cut an oversized square.  Then cut it down to the right size.

Third, hammer the staples into place.  I hammered one side first then pulled it tight as I hammered the rest.
IMAG7529<

Fourth, attach some kind of bracket to hang the frame.  I just used what was already on the frame.  Two eye  and a rope.  Eventually I think I will replace it with a bracket that won’t be visible.

The best part, hang it up!  You can use clothes pins to attach pictures or objects to the wire.  I didn’t have any on hand, so I just stuck the corners into the wire.  Enjoy!